Welcome to the World of a Knowledge seeker.....!!!!
Dr.Prerna
drprernashinde@gmail.com
Monday, March 23, 2009
Subscribe to:
Posts (Atom)
skip to main |
skip to sidebar
Curriculum Vitae
Dr. Prerna Shinde
Address : 2A/604, Jaltrang, A.S.Marg, Rambaug,
Powai, Mumbai – 4000 76.
Tel.Office : +91-22 25702760
Tel.(Res): +91 22 25702760
Mobile No. : +91 9892591238
E-mail: prernashinde@vsnl.net
prernashinde@mtnl.net.in
Date of Birth: 22 / 03/ 1958
Education:
Ph.D.(Physics) 1984-91
Deparment of Physics IIT, Powai, Mumbai 400076
TITLE OF THE THESIS:
‘DESIGN AND CONSTRUCTION OF SOFT X-RAY APPEARANCE POTENTIAL SPECTROMETER (SXAPS) FOR SURFACE ANALYSIS”.
Guide : Prof B.D. Padalia, Department of Physics IIT, Bombay.
M.Sc. (Solid State Physcis) 1978-80.
First Class, Department of Physics
Shivaji University, Kolhapur, Maharashtra.
Work Experience of Dr. Prerna Shinde
Last one first basis.
1.2008 till date
Working as Associated Professor in Akruti City Gold Institute for Infrastructure Management.
Organized and conducted Executive development Program for Site Engineers and Project Inchrges.
Taught subject related to Quality management, Material Management and Concrete Technology.
2. 2007 – 1995 worked as independent Consultant
Proprietor: Analytical Instrumentation
This is a Business Service Support Enterprise
Analytical Services
Organize the testing and analysis of materials using sophisticated instruments like XRD, XRF, GCMS, AAS, HPLC, DSC, TGAS and other as required and defined by the information need.
These analytical services help industry in following:
Formulation of the product,
Raw Material Finger printing thereby vendor analysis,
Quality Check – Methods and trouble shooting,
Standardization of process parameters using analytical methods,
Identification of useful analytical instruments for particular industry.
Setting up of Laboratory and Training
Identification of right instrument/s for the purpose and training of persons to get the benefits of using the instrument. Necessary calibration and standardization of instrument for the industry and suitable training programmes are organized.
Environmental Science
Industrial Hygiene
Identifying the Hazard and Risk Characterization, risk evaluation and quantification
Preparation of Material Safety Data Sheet
By generating necessary the data – using different analytical methods,
Quantification of hazardous elements according to OSHA. The data is useful for EU and Prop 65 norms.
3. 1991-95
Regional Sophisticated instrumentation Centre, Indian Institute of Technology (IIT), Bombay 400076.As: Scientist, In charge of X-Ray Diffractometer (XRD) and Gas Chromatography – Mass Spectrometer (GCMS)
1986-91
Dept. of Physics, Indian Institute of Technology (IIT)
Powai at Mumbai – 400076
As: Senior Research Fellow
1982-86
Dept. of Physics, Indian Institute of Technology (IIT)
Powai at Mumbai - 400076
As Junior Research Fellow
1981-82
Shivaji University, Kolhapur.
As Unior Research Fellow
1980-81
Shree Warna College, Kolhapur
As Lecturer in Junior college
Consultancy Project completed
1. Construction
Durability Assessment of cooling Tower At Eklahare Thermal Power Plant, Nashik
Durability Assessment of Pali Hill Reservoir, BMC
Durability Assessment of Air India Quarters
2. Pharmaceuticals
Study of Polymorphism for product standardization and process parameters for
Mebendazaol, Fenmendazaol, Oxfendazol,Flubendazol.
Aminopenicellanic Acid.
3. Pigment
Phthalocyanine blue pigments – Polymorphs, quantification of a and b polymorph.
4. Polymer
Plastics – Crystallinity in HDPE
BOPP – Polymer modification using Hydrocarbon resins.
Raw material testing of construction materials: emulsions, plastisizer, cement, epoxy,etc.
5. Welding Industry
Welding consumables – Identification of elements using XRF in Fluxes, raw materials.
Environment – Quantification of suspended particulate matter using XRF
Preparation of Material Safety Data Sheets (MSDS) for welding consumables after generating the required data.
6. Environmental Science
Industrial Hygiene
1. Identifying the Hazard and evaluation and quantification of the risk for polymer products: Lami Tube, laminates. Generating the data of the product for the same. Prepare the manual and writing MSDS and revision of MSDS.2.Study of Heavy Metals in Lami Tube,which Partial fulfillment ofrequirement for CONEG METALS AND EUROPEAN PARLIAMENT AND COUNCIL DIRECTIVE 94/62//EC, 1994, on packaging and packaging waste.For this work, we are want to validate the method which will be used for polymer.
7. Laboratory Setting and Training
Identification of right instrument for the user and installation of the instrument and putting it to use to get the benefits of using the instruments is undertaken by her.
Training of the personnel is an integral part of the exercise and has been done successfully.
Workshop attended during 2005-07
Training course on Quality management system auditor , conducted by ICMQ INDIA, 9- 13 August 2007.
The Seminar on Development of National Consultant Services organized by ADB, CDC & Exim Bank. 9-10 November, 2006
5 days NRBPT approved lead auditor training course on Quality management system (TQM9000:2000) – 22-27 Aug. 2006.
Programme on insurance importance & awareness conducted by College of Insurance on 28th Jan. 2006.
5 days NRBPT approved lead auditor training course on occupational health & safety management system (OHSAS 18001) – 2-7 Aug. 2005.
Workshop for “Auditing for EHS Legislation” Organized by Quality Council of India on 7th June 2005.
List of Publications:
1. “A versatile Soft X-Ray appearance potential spectrometer” B.D. Padalia, P.S. Shinde, A.V. Korgaonkar and W.C.J. Carvalho, Rev. Sci. Instruments 62 (1991) 1109.
2. Measurement of the Bremsstrahllung background in Soft X-Ray Appearance Potential Spectroscopy” P.S. Shinde, B.D. Padalia – Nucl. Instrum. And methods in Physics Research B 8 (1993) 1996-99.
3. “Filter Circuit for Soft X-Ray Appearance Potential Spectrometer” P.S. Shinde, B.D. Padalia, etc. al Proc. DAE Solid State Sympo 33, C 1991.
4. “Soft X-Ray Appearance Potential Spectrometer” B.D. Padalia, P.S. Shinde et al. Proc. International. Symp. On Vacuum Technology and Nuclear Application 107, 1983.
5. “Charge Transfer Studies ion Mu Metal using Soft X-Ray Appearance Potential Spectrometer “, P.S. Shinde, B.D. Padalia and P.K. Mehta Pro. DAE Solid State Symp. 35 C 1993.
6. “Rapid and non-destructive Analysis of alloy by Radioisotope Excited X-Ray Fluorescence” P.S. Shinde, B.D. Padalia, ICARID 1995.
7. “Improved instrumental sensitivity in Soft X-Ray Appearance Potential Spectrometer”, P.S. Shinde, B.D. Padalia, Solid State Sympoisum (India) 1993.
8. EDXRF, XRD Studies of Rubies and Sapphires, X-Ray Spectrometry 2000.
Prerna Shinde - Knowledge Seeker
vISITORS TO MY BLOG
My CV
Curriculum Vitae
Dr. Prerna Shinde
Address : 2A/604, Jaltrang, A.S.Marg, Rambaug,
Powai, Mumbai – 4000 76.
Tel.Office : +91-22 25702760
Tel.(Res): +91 22 25702760
Mobile No. : +91 9892591238
E-mail: prernashinde@vsnl.net
prernashinde@mtnl.net.in
Date of Birth: 22 / 03/ 1958
Education:
Ph.D.(Physics) 1984-91
Deparment of Physics IIT, Powai, Mumbai 400076
TITLE OF THE THESIS:
‘DESIGN AND CONSTRUCTION OF SOFT X-RAY APPEARANCE POTENTIAL SPECTROMETER (SXAPS) FOR SURFACE ANALYSIS”.
Guide : Prof B.D. Padalia, Department of Physics IIT, Bombay.
M.Sc. (Solid State Physcis) 1978-80.
First Class, Department of Physics
Shivaji University, Kolhapur, Maharashtra.
Work Experience of Dr. Prerna Shinde
Last one first basis.
1.2008 till date
Working as Associated Professor in Akruti City Gold Institute for Infrastructure Management.
Organized and conducted Executive development Program for Site Engineers and Project Inchrges.
Taught subject related to Quality management, Material Management and Concrete Technology.
2. 2007 – 1995 worked as independent Consultant
Proprietor: Analytical Instrumentation
This is a Business Service Support Enterprise
Analytical Services
Organize the testing and analysis of materials using sophisticated instruments like XRD, XRF, GCMS, AAS, HPLC, DSC, TGAS and other as required and defined by the information need.
These analytical services help industry in following:
Formulation of the product,
Raw Material Finger printing thereby vendor analysis,
Quality Check – Methods and trouble shooting,
Standardization of process parameters using analytical methods,
Identification of useful analytical instruments for particular industry.
Setting up of Laboratory and Training
Identification of right instrument/s for the purpose and training of persons to get the benefits of using the instrument. Necessary calibration and standardization of instrument for the industry and suitable training programmes are organized.
Environmental Science
Industrial Hygiene
Identifying the Hazard and Risk Characterization, risk evaluation and quantification
Preparation of Material Safety Data Sheet
By generating necessary the data – using different analytical methods,
Quantification of hazardous elements according to OSHA. The data is useful for EU and Prop 65 norms.
3. 1991-95
Regional Sophisticated instrumentation Centre, Indian Institute of Technology (IIT), Bombay 400076.As: Scientist, In charge of X-Ray Diffractometer (XRD) and Gas Chromatography – Mass Spectrometer (GCMS)
1986-91
Dept. of Physics, Indian Institute of Technology (IIT)
Powai at Mumbai – 400076
As: Senior Research Fellow
1982-86
Dept. of Physics, Indian Institute of Technology (IIT)
Powai at Mumbai - 400076
As Junior Research Fellow
1981-82
Shivaji University, Kolhapur.
As Unior Research Fellow
1980-81
Shree Warna College, Kolhapur
As Lecturer in Junior college
Consultancy Project completed
1. Construction
Durability Assessment of cooling Tower At Eklahare Thermal Power Plant, Nashik
Durability Assessment of Pali Hill Reservoir, BMC
Durability Assessment of Air India Quarters
2. Pharmaceuticals
Study of Polymorphism for product standardization and process parameters for
Mebendazaol, Fenmendazaol, Oxfendazol,Flubendazol.
Aminopenicellanic Acid.
3. Pigment
Phthalocyanine blue pigments – Polymorphs, quantification of a and b polymorph.
4. Polymer
Plastics – Crystallinity in HDPE
BOPP – Polymer modification using Hydrocarbon resins.
Raw material testing of construction materials: emulsions, plastisizer, cement, epoxy,etc.
5. Welding Industry
Welding consumables – Identification of elements using XRF in Fluxes, raw materials.
Environment – Quantification of suspended particulate matter using XRF
Preparation of Material Safety Data Sheets (MSDS) for welding consumables after generating the required data.
6. Environmental Science
Industrial Hygiene
1. Identifying the Hazard and evaluation and quantification of the risk for polymer products: Lami Tube, laminates. Generating the data of the product for the same. Prepare the manual and writing MSDS and revision of MSDS.2.Study of Heavy Metals in Lami Tube,which Partial fulfillment ofrequirement for CONEG METALS AND EUROPEAN PARLIAMENT AND COUNCIL DIRECTIVE 94/62//EC, 1994, on packaging and packaging waste.For this work, we are want to validate the method which will be used for polymer.
7. Laboratory Setting and Training
Identification of right instrument for the user and installation of the instrument and putting it to use to get the benefits of using the instruments is undertaken by her.
Training of the personnel is an integral part of the exercise and has been done successfully.
Workshop attended during 2005-07
Training course on Quality management system auditor , conducted by ICMQ INDIA, 9- 13 August 2007.
The Seminar on Development of National Consultant Services organized by ADB, CDC & Exim Bank. 9-10 November, 2006
5 days NRBPT approved lead auditor training course on Quality management system (TQM9000:2000) – 22-27 Aug. 2006.
Programme on insurance importance & awareness conducted by College of Insurance on 28th Jan. 2006.
5 days NRBPT approved lead auditor training course on occupational health & safety management system (OHSAS 18001) – 2-7 Aug. 2005.
Workshop for “Auditing for EHS Legislation” Organized by Quality Council of India on 7th June 2005.
List of Publications:
1. “A versatile Soft X-Ray appearance potential spectrometer” B.D. Padalia, P.S. Shinde, A.V. Korgaonkar and W.C.J. Carvalho, Rev. Sci. Instruments 62 (1991) 1109.
2. Measurement of the Bremsstrahllung background in Soft X-Ray Appearance Potential Spectroscopy” P.S. Shinde, B.D. Padalia – Nucl. Instrum. And methods in Physics Research B 8 (1993) 1996-99.
3. “Filter Circuit for Soft X-Ray Appearance Potential Spectrometer” P.S. Shinde, B.D. Padalia, etc. al Proc. DAE Solid State Sympo 33, C 1991.
4. “Soft X-Ray Appearance Potential Spectrometer” B.D. Padalia, P.S. Shinde et al. Proc. International. Symp. On Vacuum Technology and Nuclear Application 107, 1983.
5. “Charge Transfer Studies ion Mu Metal using Soft X-Ray Appearance Potential Spectrometer “, P.S. Shinde, B.D. Padalia and P.K. Mehta Pro. DAE Solid State Symp. 35 C 1993.
6. “Rapid and non-destructive Analysis of alloy by Radioisotope Excited X-Ray Fluorescence” P.S. Shinde, B.D. Padalia, ICARID 1995.
7. “Improved instrumental sensitivity in Soft X-Ray Appearance Potential Spectrometer”, P.S. Shinde, B.D. Padalia, Solid State Sympoisum (India) 1993.
8. EDXRF, XRD Studies of Rubies and Sapphires, X-Ray Spectrometry 2000.
My links
Followers
Blog Archive
About Me
- Prerna
- Prerna is consultant always Interested in knoweldge about human nature& relations and its relevance to scientific & technological innovations.